Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Single Stg 1.5 Ton 24k BTU AHU 16 SEER2

Arcoaire AC Single Phase Split System Deluxe Single Stg 1.5 Ton 24k BTU AHU 16 SEER2
Kit Includes PVC Ptrap Kit, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Whip 6' 1/2" 10GA, Furnace Leveler, No Vent Caps, 2" Plastic Pad, 2H/2C Thermostat, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 1.5 Ton 24k BTU AHU 16 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Includes:
H4A6S18AKAWA, FCM4X2400AL, ACBKIT2
Nominal Capacity (BTUH):
18000
Cooling Efficiency (EER2):
13
Cooling Efficiency (SEER2):
16
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
AHU
System Outdoor Type:
Single Stage
System Coil Configuration:
Multi Position
System AHU Type:
Variable Speed
System Nominal Tons:
1.5
AHRI System Number:
208083301
A/C, Single Phase, Split AHU Single Stage, Multi Position H4A6S/FCM4X

Air Conditioner Condenser
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride igniter
  • One piece prepainted steel cabinet
  • In-shot burners
  • 33 1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, convertible to propane with accessory kit
  • Four position - upflow/downflow/horizontal (left/right) installation
  • Three position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly
Multi Position Fan Coil
  • Smart Diagnostics
  • Factory installed TXV metering device
  • Variable Speed EC motor
  • Supports 2 Stage Outdoor Units
  • Dehumidification Mode
  • Heat Pump Comfort/Efficiency Options
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • Variable speed EC Motor operates efficiently at all speeds
  • Ultra-low power consumption during fan only operation
  • Meets requirements of a 2% cabinet leakage rate when tested at 1.0 in wc of static pressure
  • Minimal standing water - less microbial growth for improved IAQ and reduced condensate line clogging and related condensate leakage
  • Tested for condensate disposal at conditions much more severe than those required by AHRI • Primary and secondary drain connections to comply with HUD
  • All pans constructed of an injection molded glass-filled polycarbonate engineered resin material, with brass drain connections.
  • Easy 4 wire hook up: reduces installation time
  • Multi-position installation
  • Modluar cabinet on 5 ton model
  • 5kw - 30kw Heat Kits Available